Bosch Security System

Please set Output 6 to enable Entry/Exit Beep: Output 6 (Default = Codepad – Entry/Exit + D Alarm) Location Default Update Event Code 570 0 8 Event Code ...

Phone Numbers 000-015 no longer need the number 10 put in place of 0. A normal phone number can be entered, as the terminating number is 15. Subscriber ID...

Currently we have the following detectors which have Pet immunity feature: Blue Line Gen 2 series -- PIR detector ISC-BPR2-WP12: Pet immunity to 20 kg; B...

Some installers want to know what is the appropriate distance between Radion Repeater and Radion Receiver.  Range experienced by installers is affected ...

An issue has been identified that certain HCR-15 receivers could lose the fobs programmed in.  CLE have resolved this issue with the HCR-15AF receiver k...

Prior to NBN, a PSTN (Public Switched Telephone Network) phone line had a measurable voltage coming down the line from the local Telephone Exchange. ...

Here is how to find out what is the issue with your specific panel. Note: Most Fault conditions will require the assistance of an/ your Licenced Sec...

A Day Alarm allows a combination of zones to be monitored when the system is disarmed. The indications are available using any of the programmable outputs i...

Solution 16+ and Solution 64 can be configured to automatically arm and/or disarm an area automatically if required. Procedure (1) To setup an Auto ...