Solution 16+/64 - Auto Arming an Area

Modified on Fri, 22 Jan, 2021 at 10:48 AM

Solution 16+ and Solution 64 can be configured to automatically arm and/or disarm an area automatically if required.


Procedure


(1) To setup an Auto Arming time, MENU 7-5-0 to select a schedule that is not being used, and program the schedule name to something convenient.


(2) MENU 7-5-1 Set the start time for the schedule to the arming time you require. The stop time should be set to 12:00am or --:-- am, which prevents the system from auto disarming.


(3) Set the Schedule Function, MENU 7-5-3 to Area On/Off.


(4) Set the Schedule Index, MENU 7-5-4 to correspond to the area to operate. If an index of 0 is used then arming will occur for all areas.


(5) Finally select the days of the week you wish auto arming to occur in MENU7-5-2Press numbers [1] to [8] to enable/disable the days of the week that the schedule will operate.


 


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article