Solution 64 - Prox Reader Open a Door only (no Arm/Disarm)

The CM110 Relay Output Module allows 2 separate PR100 Prox Readers to be connected to the Solution-64 Control Panel.

Up to 3 x CM110 modules can be fitted to the Solution 64 panels running Version 1.10 firmware or higher.

Solution 64 can support up to 6 water resistant external Prox Readers.

Example: use Prox Reader 9 to open a Door:

1) MENU 162 to assign Prox Reader 9 Access Group 1 to 8, e.g, Access Group 1;

2) MENU 411 to assign a spare Output Event Type 60 - Access group;

    MENU 412 to assign Event Assignment - 001 Access Group 1;

    MENU 413 to assign Output Polarity - 04 Normally Open 1 Shot Low;

    MENU 414 to assign Time Parameter - 10 seconds;

3) MENU 120 to add tokens for Prox Reader 9;

4) MENU 145 to assign Access Group for the token users - Access Group 1;

5) MENU 161 to change Prox Reader 9 area to 0;

6) MENU 163 to untick "All On Arming Allowed" and "Disarming Allowed" for Prox Reader 9;

7) Present token to Prox Reader 9 to access door.