When using the RADION receiver ST make sure the rotary dial on the rear is set to a 3.
You can mount the wireless receiver in residential, commercial or industrial locations in which a compatible control panel is already installed.
The installation of the wireless receiver should be at a distance no greater than 300 m (1000 ft) from the control panel.
Wiring Considerations
The wireless receiver connects to a control panel using the terminal block connections (R, B, Y).
Use 22 AWG (0.6 mm) wires from the receiver to the control panel when connecting the wiring to the terminal block of the receiver.
R = +12V Power
B = - GND
Y = IP/Input
Note: You will need to enable the receive in the same location as the RF3212E.
E.G For a Solution 6000 --> Menu 3-5-0 Option 4 Bosch Serial Receiver.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article