Solution 2000 & 3000
Using an ICON codepad Add RF Device (Zone) 1. Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]). 2. Enter the device n...
Mon, 8 Feb, 2021 at 4:01 PM
By default, only codepad 1 is switched on. If you want to add additional Codepads, you will need to check the DIP switch settings for IUI-SOL-ICON or I...
Wed, 17 Feb, 2021 at 12:01 PM
This Technical Note explains about the different Codepads and Touchscreens that can be used with these panels. It also includes the POWER Requirements f...
Fri, 1 Jun, 2018 at 4:59 PM
The following document explains the process of: - How to check your COM Port on your PC and ensure you can see the DLA ( Silicon Labs CP210x USB to UAR...
Wed, 5 Sep, 2018 at 10:12 AM
The Solution 2000 and Solution 3000 can use the Multicom BMC-3 GPRS unit which can be directly connected to the SDI-2 BUS. There are 14 steps that an In...
Tue, 5 Jun, 2018 at 2:57 PM
Location 266 when using an Icon code pad Menu 46 when using an Alphanumeric codepad or touchscreen.
Tue, 28 Aug, 2018 at 8:53 AM
New software for your touchscreen is released regularly and can be updated automatically over WiFi for screens connected to Solution 2000 or Solution 3000 a...
Wed, 12 Sep, 2018 at 10:11 AM
Each system event can be sent to RSC+ app using Push Notifications under different types: Alarms System events Fault/Trouble Please check the docum...
Mon, 2 Sep, 2019 at 11:55 AM
Please follow the steps on the attached video. The video will guide you through the steps to enable the push notifications on your iOS device. Once...
Wed, 10 Oct, 2018 at 10:46 AM
You can change the sound if required in the SETTINGS of the customer panel profile in RSC+ App. > Log in to RSC+ App >Select the panel profile...
Fri, 12 Apr, 2019 at 2:49 PM