New Solution 6000 Firmware Update
Note:
This update is NOT for Solution 6000 IP ONLY panels.
Please follow the link to download the Solution 6000 V2.53.73 Hotfix flash update files.
Solution 6000 Firmware Updates
This update fixes an issue when using Solutionlink via the panel PSTN port.
Typically, this affected the ability to upload / download to the panel using Solutionlink via a
PSTN / SIP line or dialler capture devices like those sold by Permaconn, SCSI and Suretek.
Please take the time to read through the release notes as there are multiple improvements in this firmware.
Some features will require Solutionlink V2.30.
This update is recommended for installations using the panel’s PSTN port for modem connectivity via Solutionlink.
You will need to save the files to your hard drive and run the EXE file.
Follow the instructions in the attached Firmware Update Guide PDF to update the panel.
Note: This firmware upgrade is only suitable for Solution 6000 panels, which have serial numbers larger than 240000.
Do not attempt to upgrade panels with lower serial numbers as the panel will not run with this version.
Caution:
Depending on the firmware version you are upgrading from, the panel may perform a complete system default at the end of the update process.
To retain programming information, you will need to make a copy of the panel data using Solution Link before updating the firmware.
Once the update is complete, if the panel defaulted, then connect using Solution Link and download the programming information back into the panel.
If you have issues with performing this firmware update please contact:
Bosch Technical Support 1300 026 724