Setup Static IP on S2000 or 3000 with B426-M

Modified on Thu, 9 Jun, 2022 at 2:49 PM

To setup a Static IP you will need to use AlinkPlus.

You may need to set IPV6 to be ENABLE

You may need to setup an DNS Server.

They will also need to ensure that the DNS Server settings are inputted in the router for IPV6, most use Google Domain Name System.:
1. 2001:4860:4860::8888.
2. 2001:4860:4860::8844.
The Router should have UPNP switched ON or have port 7700 forward to the local IP address of the B426-M

The B426-M by default is set to use IPV4 and not IPV6 network settings.
Most 5G operators require the remote connection device to provide IPv4/IPv6 and IPv6/IPv4 Address Translation to be enabled within their router.
Some routers do not support auto translation and require IPV6 to be enabled manually.