Please follow the link to download the Solution 6000 V2.53.18 Hotfix flash update files.
Solution 6000 Firmware Updates
This update includes bug fixes and,
1) Support for RF112 and RF113 Smart RF Reed Switches
2) Support for RF160 Smart RF 2 Channel Output Module
3) Support for Dual SIM MyAlarm Service Plan When Using CAT1 Radio Modules.
Please take the time to read through the release notes.
This update is required when using 4G radio modules and is recommended for all installations using IP connectivity or SMART RF devices.
You will need to save the files to your hard drive and run the EXE file.
Follow the instructions in the attached Firmware Update Guide PDF to update the panel.
Note: This firmware upgrade is only suitable for Solution 6000 panels, which have serial numbers larger than 240000.
Do not attempt to upgrade panels with lower serial numbers as the panel will not run with this version.
Caution:
Depending on the firmware version you are upgrading from, the panel may perform a complete system default at the end of the update process.
To retain programming information, you will need to make a copy of the panel data using Solution Link before updating the firmware.
Once the update is complete, if the panel defaulted, then connect using Solution Link and download the programming information back into the panel.